Ancillary equipment

  • Flying Wheel

    Flying Wheel

    A disc-shaped part with a high moment of inertia acts as an energy store. For a four-stroke engine, work is done once every four piston strokes, that is, only the power stroke does work, and the exhaust, intake and compression strokes consume work.

  • For Feet Flying Shears

    For Feet Flying Shears

    For Feet Flying Shears are widely used in continuous rolling workshops such as billet, small, wire rod and strip steel. In hot-rolled billet, small and wire rod tandem mills, cut-to-length shears are generally installed behind the last finishing stand of the tandem mill or at the end of the output roller table. In hot-rolled or cold-rolled strip workshops, the ready-to-run shears are installed on continuous operation units such as cross-cutting units, continuous galvanizing and electrotinning.

  • Rotational Flying Shears

    Rotational Flying Shears

    The shearing machine for rolling pieces in transverse shearing operation is called flying shear. It is a processing equipment that can quickly cut iron plates, steel pipes and paper rolls. The product in rolling bar shearing has the characteristics of low power consumption and low investment cost.

  • Curved Arm Flying Shear

    Curved Arm Flying Shear

    The shearing machine for rolling pieces in transverse shearing operation is called flying shear. It is a processing equipment that can quickly cut iron plates, steel pipes and paper rolls. The product in rolling bar shearing has the characteristics of low power consumption and low investment cost.

  • Bearing

    Bearing

    Bearing is a kind of mechanical element that limits the relative motion to the required range of motion and reduces the friction between moving parts. The design of bearings can provide free linear motion of moving parts or free rotation around a fixed axis, and can also prevent movement by controlling the vector of normal force acting on the moving parts. Most bearings promote the required movement by minimizing friction. Bearings can be widely classified according to different methods, su...
  • Dust Collector

    Dust Collector

    Dust removal equipment refers to the equipment that separates dust from flue gas, also known as dust remover. Everyone has the experience of wearing masks, which is a simple filtering and dust removal equipment. [1] The dust removal mechanism of dust removal equipment is very simple. Like the dust removal mechanism of mask, it is realized by mechanical interception of fly ash particles in flue gas by filter materials. However, in addition, the first received fly ash particles also form a st...
  • Power Distribution Cabinet

    Power Distribution Cabinet

    The distribution cabinet (box) is divided into power distribution cabinet (box), lighting distribution cabinet (box) and metering cabinet (box), which is the last level equipment of the distribution system. Distribution cabinet is the general term of motor control center. The distribution cabinet is used in occasions with scattered load and few circuits; Motor control center is used for occasions with concentrated load and many circuits. They distribute the electric energy of a certain circui...
  • Crank flying shear

    Crank flying shear

    The company’s production equipment is mainly used in rolling mills, the equipment can produce bar, wire, steel, strip steel, output from 10,000 tons/year to 500,000 tons/year:
  • Crocodile scissors

    Crocodile scissors

    • Model:50ton~500ton
    • Cutting edge width:800~1500
    • Material of shear blade:H13
    • Motor power:5.5~35KW
    • Product description: Crocodile shear is suitable for cold shear of various shapes of section steel and various metal structures in metal recovery companies, scrap steel factories and smelting and casting enterprises
  • Roller table, Lift table (hydraulic)

    Roller table, Lift table (hydraulic)

    • Roller surface width:300mm~2000mm
    • The gear material:45#、Q345
    • Weight:800kg~7000kg
    • Length:Custom customization
    • Product description: Roller table is the main equipment for transporting rolling parts in rolling workshop. Its weight accounts for about 40% of the total weight of the equipment in the whole rolling workshop, and it is t
  • Speed reducer (transmission speed)

    Speed reducer (transmission speed)

    ZD reducer product featuresZD reducer is a single-stage involute cylindrical gear reducer, ZDH is a single-stage circular circular cylindrical gear reducer, ZDSH is a single-stage double-circular cylindrical gear reducer.They are mainly used for mechanical transmission of mining, metallurgy, cement, construction, chemical industry, secret service and other mechanical equipment. The high-speed shaft speed is not more than 1500r/min, and the gear circular speed is not more than 18m/s. The worki...